Electric Dog Fence System for Small, Medium and Large Dogs

Our electric dog fence system is a reliable and cost-efficient pet containment solution. The system uses a buried wire that transmits a harmless radio signal. When your dog approaches the boundary, the collar receiver first delivers a warning beep. If your dog continues closer, the system will issue a mild shock. Stronger shocks will be delivered if your dog goes further beyond the set boundary, encouraging your dog to stay within the established limits.

The wall-mounted transmitter is the central controller of the entire electronic system. Ensure the wire is set up in a loop. The receiver collar will first make a warning beep and then provide continuous stimulation if your dog attempts to approach the wire boundary.

To install the system, first design the containment area and calculate the required wire length. Install the wall transmitter, lay out the perimeter wire, and connect it to the transmitter. Verify the transmitter is functioning properly, set up the receiver, and test the containment system, adjusting the field width as needed. Install the boundary wire and training flags, then fit the collars on your dogs and train them.

The electric dog fence system is made of ABS material and can run for about 10 days on a single charge. The adjustable control range can cover up to 5,000 square meters (53,189 square feet or 1.2 acres). The pet collar fits dogs weighing 4 lbs or more, with neck sizes from 7.5 to 17.92 inches. The boundary wire length is 300 meters (984 feet).

Please note the following usage advice: - Do not let your dog use the receiver collar for more than 8 hours at a time. - The transmitter does not support 12V voltage or exposure to rain. - Ensure the buried wire is not knotted, as it can affect the signal. - The receiver collar is not waterproof. - Pay attention to the positive and negative poles during installation, and do not install them in reverse.

The electric dog fence system is available in both wired and wireless versions. The wired version includes 1 collar receiver, 1 wire, and 1 indoor wall-mounted transmitter. The wireless version includes 1 collar receiver and supports multiple receivers. Both options provide a safe and efficient dog fencing system to train your pets and keep them within the designated area.

If you have any issues or expectations are not met, please feel free to contact us, and we will respond within 24 hours to address your concerns.

product information: